Altair Flow Simulator 2024.1

Altair has released Flow Simulator 2024.1 is the single, unified fluid system design tool/platform for GE Aviation’s Thermal System design, Combustion, Lube/fuel systems, and externals teams. It is rooted in decades of practical usage and experience, with aerospace-quality level validation and verification.

Altair Flow Simulator 2024.1 Release Notes

New Features

Change Element and Resistor Connections in the Property Editor
The upstream and downstream connections for flow elements and thermal resistors can now be modified in the Property Editor. This is especially helpful for changing many connections at one time using multi-edit. Change the connections for thermal resistors to a flow chamber by using the flow chamber number followed by a “C”. For example, connect a convector to flow chamber 5 by typing “5C” in the Property Editor.


New Electric Motor Component (Beta)
The electric motor component has been added to the Element Library. This component is used to describe various aspects of an electric motor thermal model. It currently has inputs that can be used to run a transient duty cycle analysis given a “loss” file generated by Altair's FluxMotor program. This is considered a beta feature as more testing of various modeling scenarios is needed.


Enhancements

Junction and Heat Exchanger Rotation Improvements
The GUI now allows more control over junction and heat exchanger symbol rotation. The junction also has an automatic alignment tool that finds the best rotations for the junction relative to the attached elements. This especially helps models using 3D space (not just 2D or X-Y plane). The junction and heat exchanger angles can also be modified by typing the rotation angles in the Property Editor.


Association Line Display Control
Association line display can now be toggled on or off to help with model visualization. There are four types of association lines that can be toggled.
1. Associated Lines: Lines from thermal nodes to tube element symbols (new in 2024.1).
2. Controller Lines: Lines from the controller symbol to gauge and manipulated items (chambers, elements, thermal nodes, and resistors).
3. Group Lines: Lines from the group block to any item or other group block that has a connection with any item in the group.
4. Electric Motor Lines: Lines from the electric motor component symbol to the associated thermal nodes (new in 2024.1).


Image Display Control
The display of images can quickly be toggled on and off. This may help with model visualization, especially when working in 3D.


Add Free and Forced Blending for the Heat Transfer Coefficient (HTC)
All “built-in” forced convection correlations can now be blended with a free convection (HTC). These are the HTCs that are used with thermal convectors. This is useful if a model is expected to run with conditions that produce a range of velocities in the system. At low velocities, a free convection HTC may be higher than the forced convection HTC.


Heat Transfer Coefficient Improvements
Improvements to the heat transfer coefficients used by thermal convectors include:
1. New flat plate correlation that includes equations for laminar Re, turbulent Re, local or average HTC, and free HTC blending.
2. New correlation for a turbulated tube. It uses the same correlation for a turbulated surface that was added to the advanced and incompressible tube in the 2024 release.
3. Added an option to include swirl in the velocity calculation for the Gnielinski Combo duct flow correlation.
4. Added an option to include the total velocity or velocity components (axial, radial, tangential) for a body in crossflow correlation.

Added Automatic Flow Equation Option
The valve element and the expansion/contraction elements now have an “Automatic” flow equation type. This allows the element to automatically use the compressible equations if a gas is entering the element and incompressible equations if a liquid is entering the element.


Add New Unit Set Checks during Model Open
The GUI now checks if the unit set saved in a .flo file already exists in your unit set library (saved in the AppData\Local\Altair\FlowSimulator folder). If a unit set with the same name is found, the GUI checks each Unit Quantity. If there are discrepancies between a Unit Quantity, you are prompted to make a choice.
Copy Items from One GUI Instance to Another
The GUI can now copy flow chambers and elements from one GUI instance to another. Thermal items can’t be copied using this method. The element and chamber numbers do not remain the same when copied. Do not copy an element without including its upstream and downstream chambers in the selection.


Known Issues
The following known issues will be addressed in a future release as we continuously improve performance of the software:
- Some very large models or models using a small screen unit (like millimeters) can have text that is too small to read. The maximum size of 80 may be too small. Using a different screen unit may allow for larger text.



Flow Simulator is a 3D design tool that provides interdisciplinary modeling and optimization for fluid and thermal systems within a CAD-integrated environment. System-level design has become increasingly critical as organizations are tasked with simulating complex duty cycles. Fast software solutions like Flow Simulator are needed to model an entire system, including rapid iteration concept modeling and understanding of system simulation and system behavior in applications such as rotating machinery design, electromobility, wind turbines, heat exchangers, and virtually anything that encompasses thermal management. Flow Simulator was originally developed by GE Aviation to serve as a fast flow network simulator for aircraft engines – simulating how an entire flight cycle would behave in the real world, from runway and take off to flight and landing. Since its inception, it has been used to simplify modeling for a variety of complex thermal systems applications, including healthcare, locomotives, and renewable energy.

Altair Flow Simulator - Integrated Thermo-fluid System Design


Altair is a global technology company providing software and cloud solutions in the areas of simulation, high-performance computing (HPC), and artificial intelligence (AI). Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.

Owner: Altair
Product Name: Flow Simulator
Version: 2024.1
Supported Architectures: x64
Website Home Page : www.altair.com
Languages Supported: english
System Requirements: Windows *
Size: 611.7 mb