XfrogPlants | Flowers 3 Library vol.2
XfrogPlants | Flowers 3 Library vol.2 | 2.2 Gb
Flowers 3 vol.2 contains 3D flower models of 10 species from around the world. Each species includes 9 variations of the plant for a total of 90 highly detailed, fully textured 3D models. Use XfrogPlants Flowers 3 to populate your digital gardens and create stunning virtual landscapes.
History
The concept behind Xfrog is to give the user, powerful building blocks of Nature as modeling tools. Rather than draw, loft, extrude, revolve, the user procedurally defines organic forms using sliders.
XfrogPlants, are 30 libraries of popular plants, (2000+ plant models), and are built by botanical experts who gather real leaves and bark and painstakingly match photographic references to derive 3-9 variations of each Species of plants that they model.
The XfrogPlants are in all popular 3d formats and available as individual models, libraries, and bundles of libraries in our online shop.
In XfrogPlants Flowers 3 Library vol.2 included:
- Paeonia sp.
This 3D Peony contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: The Peony genus includes species native of Europe and other species native of Asia. The European species are herbaceous plants of perennial type, while the Asian species are woody shrubs. The shrubby species are rustic and can endure summer drought. However, they must be pruned carefully; an incautious pruning would cause the absence of flowering in the following springtime, or even the death of the plant. Multiplication is usually performed by implants, because seeding requires much care and time to be successful. In China Peonia is called “the queen of the flowers"""""""". They were protected by the emperors, and they also became the main ornamental motif of Ching and Ming ceramics.
- Passiflora sp.
This 3D Passionflower contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: The Passion Flower is a genus that encompasses many widely different species, from herbaceous plants, to creeping/climbing shrubs, to small trees. Most of the species are of Tropical origin and nature, and therefore can not be planted outdoors in temperate regions. There are a few species, however, that are rustic and can tolerate the cold of winter, if not extreme. The name of Passion Flower was given by the Jesuit missionaries in 1610, because of the resemblance they seemed to find between parts or the flower and the religious symbols of the Passion of Christ. The plant has sedative properties, which were already known to the Aztecs.
- Ranunculus sp.
This 3D Buttercup contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: Ranunculus (Buttercup) is a wide genus of flowering plants(600 species) native of temperate and cold areas of Asia. Buttercup was soon exported, however, and it was already well known in Europe in the ancient times, so much that Latin writer Apuleius called it The Wicked Herb because of the toxic properties. The Latin name Ranunculus means “small frog”, but it was the Greeks who first baptized the plant hinting at the frogs, by calling it Batrachion. The reason is that Buttercup loves the shade and the humid places near stagnant waters, just like frogs do! The plant and flower are toxic for both humans and animals, causing (amongst other things) skin ulceration.
- Saintpaulia sp.
This 3D African Violet contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: The Saintpaulia is also known as African Violet, but it has no genetic relation with the Common Violet flower. They grow forming a round crown of leaves. Saintpaulias are rustic plants who grow easily. It is however of primary importance to avoid any water stagnation at the roots. For this reason, the plant must be watered sparsely, and preferably from the bottom of the vase, so that the plant can choose by itself how much water it needs. Not only the roots are delicate, but the leaves also: if wet with water, they get stained, and may also rotten. In temperate areas, Saintpauliascan only live indoors.
- Spathiphyllum sp.
This 3D Peace Lily contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: Peace Lilies are tropical plants, that require tropical conditions to grow: shady position, warm temperature, high humidity, well-drained soils to avoid water damage to the roots and the leaves. It is used as potted ornamental in the apartments; it however requires good care to keep healthy. A peculiar characteristic of Peace Lilies is their complete lack of a stem: the leaves grow directly from the subterranean rizoma.
- Tacca sp.
This 3D Bat Flower contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: Tacca is a genus of 10 flowering species of plants. Several of these species are cultivated as ornamentals. The two most popular species are Tacca chantrieri (known as Black Bat Flower or Cat’s Whiskers) and Tacca integrifolia (White Bat Flower). Like many other tropical plants, the Bat Flower also requires to grow in the shade, in a warm environment with high air humidity and low ground humidity. The aspect of the flowers is striking and quite peculiar, but the species is also appreciated for the showy green leaves.
- Tagetes sp.
This 3D Marigold contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: The common name Marigold is apparently related to the Virgin Mary in Christian stories (Mary’s Gold). In the prehispanic Mexican culture the Marigold has cultural meaning as the flower of the dead. Marigold today has economical importance as twin cultivation along side with tomato, eggplant, and other cultivations, because it’s presence is a deterrent for some common insect pests. Marigold is also use for extraction of essential oil for perfume industry, and also as food flavorant and colorant.
- Tulipa sp.
This 3D Tulip contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: Tulips natively appear on mountainous regions with temperate climates, and need a period of cool dormancy. They do best in climate with cool long springs and early summers. Bulbs are planted in late Summer or early Autumn. Holland is today’s main producer of commercially sold plants, but the cultivation of the Tulips started a long time ago in the Middle East. Tulips arrived late in the USA, presumably around the half of XIX Century. Over the years gardeners have created many cultivar variations on the Tulips, inventing new and exciting color patterns.
- Zantedeschia sp.
This 3D Calla Lily contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: The Calla Lily is an African species that grows in the South of the continent. It was scientifically named after the Italian botanist Giovanni Zantedeschi. The common name Calla comes from Ancient Greek kalтs (beautiful), and looking at the flowers it is easy to understand why that name. The leaves of Calla Lily are basal (they grow directly from the underground bulb), and are part of the charm of the plant. In the language of flowers, the Calla Lily stands for Beauty and Instability. Due to the slender, neat and curvy shape, Calla Lily had a big aesthetic success in the early 20th century, when it became the symbolic flower of the Liberty Style.
- Zingiber officinale
This 3D Ginger contains nine highly detailed, fully textured 3D models of the plant at different ages.
Notes: Ginger is largely cultivated through all the tropical and subtropical regions of the world. It is however native of Eastern Asia. Ginger is a very well known plant for the food and medication uses of it’s root. It is one of the main spices in today’s kitchen. It is also used as flavoring for drinks. It’s anti-inflammatory and anti-oxidant properties are well appreciated for medications as well. What Ginger is less known for, it’s the flowers. And yet, it is one of the most beautiful and colorful in the whole realm of flowers. The Ginger is cold-intolerant (the minimum night temperature it can stand is 15°C) and therefore in temperate regions it is strictly an indoors plant.
More info: http://issuu.com
The library includes XFR files which allow all Xfrog 3.5 owners to fully edit each and every model as well as 1600 x 1600 Billboards and 1600 x 1600 Perspective Renders, each with alpha, for single polygon opacity mapping, or direct compositing.
visit my blog
Name: XfrogPlants Library
Version: Flowers 3 Library vol.2
3D Models: .xfr
Creator: http://xfrog.com/
Interface: english
OS: Windows XP / Vista / Seven
Size: 2.2 Gb
All parts on depositfiles.com, wupload.com, filesonic.com interchanged. It is added by 5% of the overall size of the archive of information for the restoration and the volume for the restoration
No mirrors please
No mirrors please