Siemens Solid Edge ST3 MP11 Upgrade 32bit & 64bit
Siemens Solid Edge ST3 MP11 Upgrade 32bit & 64bit | 218.1 mb & 325.7 mb
Solid Edge, a core component of the Velocity Series portfolio, is the most complete hybrid 2D/3D CAD system that uses synchronous technology for accelerated design, faster change, and improved imported reuse. With superior part and assembly modeling, drafting, transparent data management, and built-in finite element analysis, Solid Edge eases the growing complexity of product design.
About Siemens AG
Siemens AG is a German engineering conglomerate, the largest of its kind in Europe. Siemens has international headquarters located in Berlin, Munich and Erlangen. The company has three main business sectors: Industry, Energy, and Healthcare; with a total of 15 divisions. Worldwide, Siemens and its subsidiaries employ approximately 420,800 people in nearly 190 countries and reported global revenue of 76.651 billion euros for the year of 2009. Siemens AG is listed on the Frankfurt Stock Exchange, and has been listed on the New York Stock Exchange since March 12, 2001.
–––––––
Release Notes:
–––––––
Product: Solid Edge
Version: 103.00.11.04
Date: 17-Feb-2012
Maintenance Packs are all inclusive and can be installed on top of the base
release or any released Maintenance Pack.
This Maintenance Pack can be installed on top of Versions:
103.00.00.114, 103.00.01.05, 103.00.02.04, 103.00.03.04, 103.00.04.05,
103.00.05.03, 103.00.06.05, 103.00.07.05, 103.00.08.06, 103.00.09.05,
or 103.00.10.04.
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional operating system (32-bit or 64-bit)
- Windows Vista Business or Vista Enterprise operating system (32-bit or 64-bit)
- Windows 7 Enterprise, Ultimate and Professional (32-bit or 64-bit)
- Internet Explorer 8 (IE 6.0 meets minimum requirements)
Please see the Solid Edge Readme file (Readme.htm) in the …\Program Files\Solid Edge ST3
folder for additional details.
––––––––––
End of Release Notes
––––––––––
–––––––––-
Installation Notes:
–––––––––-
After downloading the Maintenance Pack to your machine, unbundle the zip file and
then dbl click on exe to install the Maintenance Pack.
Windows 7 Installation tips: In addition to turning off UAC, right click on the exe
and select "run as administrator" to complete the installation.
Windows 7 Tip: Most of the UAC security conflicts on Win7 can be avoided by installing
Solid Edge somewhere other than the default “Program Files” folder. Install in a location
like c:\SolidEdge\ that the user has full permission to write to.
–––––––––-
End of Installation
–––––––––-
–––––––––––––––––––––––––
This Maintenance Pack addresses the following PRs:
–––––––––––––––––––––––––
===API===
PR 1870918: Error if use API function Feature->Item()
PR 1866671: unnecessary parameters for the API SaveAsFlatDXFEx if the UseFlatPatternModel is set to TRUE
===Assembly===
PR 1868523: Adjustable part exceeding limits but no message of violation
PR 1878849: Hovering over Section Views causes an abort in ST3
PR 6561285: IPA from draft into assembly is very slow in ST3 when using file open dialog
PR 6637551: pathfinder locate was not working in ERA manual explode command
PR 6640000: ERA crashed when exploding parts
PR 6587167: transferring renamed components does not maintain the name
PR 1875446: Inconsistent item numbers in Draft due to replace
PR 1884912: Display clipping does not work correctly when assembly features are present
===Draft===
PR 6607642: resolved a few random crashes based on captured crashlogs
PR 2186167: Dimensions change when updating a drawing without changing the model
PR 1882594: Solid Edge is crashing when you rename an opened block
===Insight/View & Markup===
PR 6619831: ST3 is slower than V20 after OK 'Select Documents and Folders' dialog
===Part/Profile/Sheet Metal===
PR 1875019: Unable to modify parametric sketches
PR 1880039: hole diameter does not match variable / part/ draft
PR 1882801: Problem with variables in part since MP10
PR 6629214: PAR mass not transferring to DFT
===Solid Edge Embedded Client===
PR 1863800: Runtime exception when deleting the SEEC-Cache after a SE-crash
PR 6637263: Teamcenter error shown on saving a part file without assigning values to mapped prop
PR 6653508: Save As not working after upgrading to TC 8.3.3
–-
End
–-
Release Notes:
–––––––
Product: Solid Edge
Version: 103.00.11.04
Date: 17-Feb-2012
Maintenance Packs are all inclusive and can be installed on top of the base
release or any released Maintenance Pack.
This Maintenance Pack can be installed on top of Versions:
103.00.00.114, 103.00.01.05, 103.00.02.04, 103.00.03.04, 103.00.04.05,
103.00.05.03, 103.00.06.05, 103.00.07.05, 103.00.08.06, 103.00.09.05,
or 103.00.10.04.
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional operating system (32-bit or 64-bit)
- Windows Vista Business or Vista Enterprise operating system (32-bit or 64-bit)
- Windows 7 Enterprise, Ultimate and Professional (32-bit or 64-bit)
- Internet Explorer 8 (IE 6.0 meets minimum requirements)
Please see the Solid Edge Readme file (Readme.htm) in the …\Program Files\Solid Edge ST3
folder for additional details.
––––––––––
End of Release Notes
––––––––––
–––––––––-
Installation Notes:
–––––––––-
After downloading the Maintenance Pack to your machine, unbundle the zip file and
then dbl click on exe to install the Maintenance Pack.
Windows 7 Installation tips: In addition to turning off UAC, right click on the exe
and select "run as administrator" to complete the installation.
Windows 7 Tip: Most of the UAC security conflicts on Win7 can be avoided by installing
Solid Edge somewhere other than the default “Program Files” folder. Install in a location
like c:\SolidEdge\ that the user has full permission to write to.
–––––––––-
End of Installation
–––––––––-
–––––––––––––––––––––––––
This Maintenance Pack addresses the following PRs:
–––––––––––––––––––––––––
===API===
PR 1870918: Error if use API function Feature->Item()
PR 1866671: unnecessary parameters for the API SaveAsFlatDXFEx if the UseFlatPatternModel is set to TRUE
===Assembly===
PR 1868523: Adjustable part exceeding limits but no message of violation
PR 1878849: Hovering over Section Views causes an abort in ST3
PR 6561285: IPA from draft into assembly is very slow in ST3 when using file open dialog
PR 6637551: pathfinder locate was not working in ERA manual explode command
PR 6640000: ERA crashed when exploding parts
PR 6587167: transferring renamed components does not maintain the name
PR 1875446: Inconsistent item numbers in Draft due to replace
PR 1884912: Display clipping does not work correctly when assembly features are present
===Draft===
PR 6607642: resolved a few random crashes based on captured crashlogs
PR 2186167: Dimensions change when updating a drawing without changing the model
PR 1882594: Solid Edge is crashing when you rename an opened block
===Insight/View & Markup===
PR 6619831: ST3 is slower than V20 after OK 'Select Documents and Folders' dialog
===Part/Profile/Sheet Metal===
PR 1875019: Unable to modify parametric sketches
PR 1880039: hole diameter does not match variable / part/ draft
PR 1882801: Problem with variables in part since MP10
PR 6629214: PAR mass not transferring to DFT
===Solid Edge Embedded Client===
PR 1863800: Runtime exception when deleting the SEEC-Cache after a SE-crash
PR 6637263: Teamcenter error shown on saving a part file without assigning values to mapped prop
PR 6653508: Save As not working after upgrading to TC 8.3.3
–-
End
–-
visit my blog
Name: Siemens Solid Edge ST3
Version: MP11 Upgrade 32bit & 64bit
Creator: www.plm.automation.siemens.com
Interface: english
OS: Windows XP / Vista / Seven
Size: 218.1 mb & 325.7 mb
No mirrors please