O&O Software DriveLED Pro v4.0.405 (x32 & x64)

No other single part of the modern computer system is more susceptible to malfunction than the hard disk. In fact, such a malfunction can be unavoidable. With Windows-based O&O DriveLED, however, you now have the ability to recognize a potential malfunction before it happens. You can then backup your data and, through the exchange of the affected hard disk, potentially avoid a fatal loss of data. Because hard disk drives contain parts designed to operate with precision to the nearest micro inch or at speeds topping as many a thousand of revolutions per minute, the possibility of a malfunction rises with the age of the hard disk. However, the possibility of a failure and subsequent loss of data is now easily controllable with O&O DriveLED. O&O DriveLED is a partner you can depend on: accurately telling you when it’s time to backup your important data with O&O DiskImage, or even replace the hard disk entirely.A single application will help you monitor all the hard disks on your PC and will keep them under constant observation.

Hard Disk Monitor warns of Worst Case Scenario!
No other single part of the modern computer system is more susceptible to malfunction than the hard disk. In fact, such a malfunction can come without warning and is often unavoidable. With O&O DriveLED, however, you now have the ability to recognize a potential malfunction before it happens.

An early-warning for system crashes
Although O&O DriveLED won’t let you avoid a system crash entirely, it can let you know early enough whenever there’s trouble on the horizon. O&O DriveLED is a reliable partner that accurately tells you when it is time to backup your important data with O&O DiskImage, or even to replace the hard disk.

S.M.A.R.T. hardware monitoring
Quietly running in the background, the new O&O DriveLED permanently monitors the status of your hard disks With the help of S.M.A.R.T. (Self Monitoring, Analysis, and Reporting Technology), O&O DriveLED analyses the health state of your hard disks and warns you in the event of potential malfunctions.

Running self- tests
Immediately after installation O&O DriveLED provides you with the ability to make an intensive analysis of all of your hard disks. Every hard disk that supports S.M.A.R.T. is able to run self tests. Using O&O DriveLED you can start a self-test of your hard disk with only one click of your mouse. During the tests several parameters and functions are systematically checked, including the interface, the surface and the mechanics, including every read head. In addition, the error log will be analyzed and the S.M.A.R.T. system itself will be tested. If there were no failures found, the corresponding indicator will be lit up green. If some failures occurred, O&O DriveLED will notify you. In this case, it is recommended to backup your data.

Analyze the status of your drives
In the O&O DriveLED Control Center, each drive is symbolized by a lamp. Each of these LEDs will show you the latest status of any particular drive. Depending on the status, the LEDs will display a different color:
• Blue – no activity to report
• Green – reading access on the partition
• Red – data is being written on the partition
• Yellow – data is being simultaneously written and read on the partition

While O&O DriveLED makes it possible for you to see your hard drive‘s built-in LEDs on your computer screen, this is just the beginning. In addition, you now have the possibility of monitoring all of your virtual drives, such as network drives, being able to clearly distinguish between read-access and write-access.

Starting with version 4, O&O DriveLED is available in three different Editions. The Professional Edition can monitor the drives on a desktop computer. It cannot be used on server operating systems and contains no interfaces for network management. The Workstation and Server Editions have interfaces for controlling O&O DriveLED across a network. Together with O&O Enterprise Management Console, it’s possible to identify impending crashes on network computers. The Workstation Edition can only be used on desktop computers, the Server Edition on both desktop and server systems.

Highlights:
• Redesigned user interface
• Also available in Workstation and Server Editions
• Status reports
• Displays read/write access for logical volumes
• Displays storage capacity for every drive
• Automatic monitoring of all S.M.A.R.T. properties
• Displays current temperatures on all hard disk drives (when supported by manufacturer)
• Prognosis for remaining operational life of hard disk drives
• Warning of possible operational errors on all hard disk drives
• Supports all Windows-compatible disks
• Support of SCSI-disk drives

Operating System: Windows® 7, XP, 2000 Pro - 32-Bit, 64-Bit